Rosemount™ 500 Gas Chromatograph

Demander un devis

Télécharger le logiciel

Product Description

The Rosemount™ 500 process gas chromatograph is designed for a variety of refining, petrochemical, power and environmental applications where selected components in gaseous or liquid streams must be precisely monitored on a continuous basis.

Spécifications

Mounting: Free-standing (standard); wall-mount (optional)

Certifications/Approvals: Standard: Designed to meet NEC Class I, Div. 1, Groups C,D (Group B with optional air purge)
Optional: CSA NRTL/C Certified : Class I, Div. 1, Groups C, D, T3B; ATEX Certified: EEx d IIB T4amb = 60 °C; CE marked per ATEX Directive (94/9/EC)

Communication Protocol: Three serial ports standard with option for a total of eight. Depending on the port, choice of RS-232, RS-422, and RS-485 is available as well as the Modbus protocol

Dimensions: 164 cm H x 51 cm W x 53.5 cm D (64.5"H x 20"W x 21"D)

Weight: Approximately 36 kg (79 lbs.)

Caractéristiques

Proven performance with thousands of units installed around the globe
Isothermal analysis with 1 or more thermal conductivity detectors /heat sink airless ovens
Fully compatible with modern Ethernet networks and DCS communication
Designed for field mounting without the need for expensive analyzer shelters or sacrificing analytical power
Diaphragm-based 6-port chromatograph valves
Liquid and gas analysis in a single unit
Thermal Conductivity Detector (TCD) sensitive down to very low parts-per-million levels
Flame Photometric Detector (FPD) also available
Every Model 500 is rigorously tested in an environmental chamber between 0° to 130 °F for 24 hours minimum
Last chromatogram for each sample and calibration stream stored in process gas chromatograph
Archives up to 64 item averages, up to 35 days of standard runs and calculations

Documentation et schémas

Comparer des produits

Tout effacer

Comparer

Vous pouvez comparer 4 produits au maximum. Veuillez affiner votre sélection. Rejeter

Tout effacer

Comparer